- Features
- Specifications
- Order Information
• SNMP
• Well Test
• 2 TCP Ports
• Production Data
• Built-in Database
• BHP Calculation
• Wet Gas Detection
• Ethernet Connectivity
• Web Reporting/Trending
• POC ( Pump of Controller)
• Optional Wireless Module
• Modular Firmware Design
• Open Source LINUX Kernel
• Remote Firmware Upgrade
• Remote Web Configuration
• vMonitor wireless GATEWAY
• Scheduled Report Generation
• Email Reporting & Notifications
• Support Multiple Firmware Versions
• Fast CPU with Low Power Consumption
• Flow Rate Calculation for Oil, Gas and Water
• Standard Communication Protocol (MODBUS
(Master Slave), DNP3,
MODBUS PEMEX)
I/O Module
• 8 to 64 AI 24 bit resolution channels with transient protection diodes.
• Range is 0-5 VDC or 0-50 VDC, 0-2.5 VDC, 0-1.28VDC, 0-64mVDC, 0
– 32 mVDC, 0- 160mVDC, 0 to 80mVDC, 0-40 mVDC, 0-20mA
• 8 to 64 DI Opto-Isolated
• 8 to 64 DO (sinking up to 500 mA each) transient protected
• 2 to 16 AO 12 bit resolution channels with load up to 500 ohm.
• Range 0-5V or 4-20 mA
• 1 Hardware Interrupt driven opto-isolated DI CPU Module
Processor and Memory
• 32 bits 800 MHz CPU or 300 MHz
• 512 MB on board System Memory
• Solid State Embedded Flash Disk (256 MB to 2 GB)
Ethernet Ports (RJ-45)
• Integrated 10/100 Ethernet Ports with TX/RX LED
• Integrated 10/100 Ethernet Ports with TX/RX LED with POE
Serial Ports
• COM1 RJ45-F type connection with LED (Opto-Isolated)
• COM2 RS485 TD/RD with LED
• COM3/COM4 PCI
Wireless Communication Module
• Optional Wireless 2.4GHz (2km line of sight) or 900MHz (10km line of sight)
to communicate with vMonitor wireless RTUs and wireless sensors iSens
family.
• Optional Pluggable Wireless Card supporting WIMAX, GPRS, 802.11,
ZIGBEE (802.15)
Power Module
• Single Voltage+12 to 20 V DC
• Power Consumption 300-400 mA @ 5VDC
• Keyboard and Display Interface
SOFTWARE DETAILS
• Operating System
• Continuous (Power)
• Open Source LINUX
• wince
• Timer/Clock
• On-board
• Misc
• Watch Dog Timer
• Temperature Sensor
• Humidity Sensor
• I2C Interface
FIRMWARE SPECIFICATIONS
Basic Modules
• Open Source LINUX Operating System
• Modular XML based Kernel
• System Manager to monitor health status for each module
• Remote firmware upgrade
• Web Server (Configuration and Reporting/Trending)
• Email Alarm notification to system administrator
• Daily Report Generation
• Email Reporting
• FTP Server
• Local and remote configuration options
• Remote Login and system maintenance
• Support for multiple firmware versions (user selectable)
• MODBUS Slave communication Protocol (both TCP and RTU)
• MODBUS Master to communication with 3rd party devices (both TCP and RTU
• MySQL lite Database Module
• Data Logging
• Wet Gas Detection algorithm
• MSL Logic
Advanced Optional Modules
• OPC Server
• DNP3
• SNMP
• HART 5,6 Master
• HART to MODBUS/MODBUS to HART module
• ISAGrapgh (IEC-61131 Standards)
• NOC
• Modbus PEMEX
• AGA3, AGA8
• Production
• Wet Gas Well Test
• Master Valve Logic
• Bottom Hole Pressure Calculation
• Flow Rate Engine (Oil, Water, Gas, Liquid)
Please Contact us at info@vmonitor.com


